Kreg Jig K4 Pocket Hole System
by Kreg
 |
Category: Tools See more product details |
(Click here)
Product Details
Manufacturer: KregModel: K4
Product features:
- 3-Hole drill guide for pocket holes
- Large clamping recess to secure your jig
- Removable drill guide guarantees you'll have the right tool
- Drill guide block doubles as a repair tool
- Requires no glue, no complicated math, and no small army of clamps
- Kreg Pine Plugs - 200 count
- Kreg SML-C125 1-1/4-Inch No. 2 Coarse Screw (1000-Pack)
- Kreg P-OAK Oak Plugs for Pockets, 50-Pack
- Kreg SK03 Pocket-Hole Screw Kit in 5-Sizes
- Kreg KJMICRODGB Jig Micro Drill Guide System
Tools and Hardware Reviews of Kreg Jig K4 Pocket Hole System
Customer Review: Love the jig, not sure about the blue screws?
Summary: 5 Stars
I just began building the Kreg workbench. I figured I'd start with a basic project like this to familiarize myself with the Kreg jig and how it operates. If I make a mistake on this, the wood is just inexpensive 2x4s that I can easily replace.
I really like the fact that it comes with the DVD, which gives all the basic details and is broken down into sections so you can easily go and just rewatch one section again.
One bit of advice I'd give from what I've experienced with the jig so far is that instead of drilling the pocket hole in one motion, I found it works better to drill down maybe a 1/4 to 1/3 of the way, then back the drill bit out to clean out the hole, then continue on in this fashion until you reach the drill stop. The holes are cleaner-cut this way and it's easier on your tools. This technique has worked well for deep holes for the 2x material. I also had one piece of wood that I neglected to sort out when I selected my wood that was heavier than all the others, so it's wetter than the others. I did have to make sure and clean the holes in the jig out after this, as they did gum up a bit from the moist sawdust produced from this one piece of wood.
I do wish the jig came with a few more screws right out of the box. You get an assortment of different sizes, but only 10 or so of each. This allowed me to basically get one little section of the workbench put together. I then had to go searching for screws. The problem was, neither Home Depot, nor Lowes carries the 2.5-inch screws. Luckily, there is a Rockler store in Denver. But when I got there, they only had one box of the 2.5-inch screws in a 50-pack, and they were the blue "weather resistant" ones. I didn't care because the screws are all hidden. I think the box was $1 more than the normal screws would've been.
Now this jig and these screws are all brand new to me. But, at this point, I did have a problem yesterday when using the blue screws. I don't know if it's the coating on them or what, but they drove down into the hole and then proceeded to strip out the threads they'd just drilled! I hadn't changed the torque setting on my drill at all from using it the day before with the regular Kreg pocket hole screws that came with the jig. So, I backed off the torque a bit and tried another screw in another hole. Same thing! I then turned the torque almost all the way down on the drill. That worked. Then I tightened that one by hand. After that, I tried driving another one by hand. I can certainly work around this, but I'm definitely apprehensive about using the blue screws again on anything else that might call for them, such as a potting bench, or outdoor chairs, etc. Kreg does make stainless steel pocket hole screws, but a box of 50 was about $25, compared to $6 for the blue screws. They do package larger quantities together as well. There was a box of 250 of the regular 2.5-inch screws that I needed, but I don't need anywhere near that many of that size screw at this point in time. However, if you were going to make, say several outdoor chairs, or multiples of anything for that matter, it is more cost effective to buy the larger boxes of screws.
I know this is supposed to be a review just for the jig, but these items all go together, so I figured I'd mention my issue with the blue screws. Before that, I did not have one problem with the regular screws. They worked flawlessly.
I am definitely looking forward to many more projects using the Kreg jig system. I don't have a lot of shop tools and no woodworking tools, other than a few basic chisels, etc. So, this gives me the opportunity to try my hand at woodworking a bit before investing a lot of money and space for things like a nice table saw, drill press, planer/jointer, tons of clamps, etc.
Is a matter of fact, I actually bought this jig to build two built-in bookcases and an adjoining mantel. I will be using the Kreg jig to build the boxes for the bookcases, as well as the faceframe and doors. No need to worry about mortise and tenons for the doors, or gluing and clamping biscuits into place and then waiting for the glue to dry. Once I get the workbench done, I'll then have a nice work surface to begin the bookcases on. If I get a chance, I'll come back and add more info once I've used the jig a bit more on plywood and hardwood for the bookcases.
So far, I'm quite impressed with the Kreg jig (other than the above-mentioned blue screws). I'm sure I'll find a ton of uses for it in the future. I've already started thinking about building a couple of nightstands and a blanket chest, something I probably wouldn't have thought of doing before buying this jig.
Description of Kreg Jig K4 Pocket Hole System
Priced roughly $40 less than the previous K3 model, this full-service pocket-hole drilling system is packed with value. It includes all the core equipment and everything you need to drill fast and easy pocket holes: a classic benchtop design, compatibility with all Kreg Jig Master System accessories, even a SkillBuilder DVD and rugged carrying case! For strong, convenient, and professional-looking joinery, this is it.The K4 system includes the following:
-Main bench-mounting unit with toggle clamp
-Patented removable 3-hole drill guide
-Spacer block attachment for repairs
-3/8" step bit to drill pocket hole and 3/16" pilot hole in one step
-6" long #2 driver bit
-Dust Collection attachment
-Rugged carrying case, SkillBuilder DVD, and detailed instructions
The Kreg Jig (K4) is the perfect choice for do-it-yourselfers and anyone new to Kreg Joinery. Whether you're building your first set of garage storage shelves or making simple repairs around the house, the Kreg Jig can help you finish the job in less time, and with far less effort than you ever thought possible. Its simple design gives you the confidence to start the project, and with joints as easy as "Drill. Drive. Done!", you'll actually want to finish it.
| |||
 With Kreg Joinery, you can make professional joints without glue for a wide variety of projects. View larger. |
 The Kreg Jig's integrated clamping recess lets you easily secure the jig to your workbench. View larger. |
 Kreg's patented 3-Hole Drill Guide can be removed and used where you need it most. View larger. |
The Kreg Jig takes advantage of a technique called Kreg Joinery. Unlike other techniques, Kreg Joinery requires no glue, no complicated math, and no small army of clamps to make wood joints that will last.
With Kreg Joinery, you can finish projects in hours instead of days. You won't spend any time clamping, waiting for glue to dry, or wading through complicated math. It essentially involves drilling a hole at an angle into one workpiece, and connecting it to another workpiece with a self-tapping screw.
Amazingly Strong with Half the Effort
Unlike mortise and tenons, dowels, and biscuits, the self-tapping screws inside of every Kreg Joint hold the stock together without glue. You don't have to worry about precisely lining up dowel holes, or spending hours cutting a perfect mortise and tenon--you simply drill the holes, drive the screws, and move on to the next project.
And because what you see is what you get with Kreg Joinery, you won't spend all your time calculating stock-overlaps and dry-fitting individual workpieces. All you need is simple math to get fast and accurate results.
Kreg Jig K4: Ideal for the DIYer
The Kreg Jig is designed specially for the do-it-yourselfer or anyone new to Kreg Joinery. It can be used for endless applications around the house, helping you to save time and effort.
The Kreg Jig's patented 3-Hole Drill Guide lets you make perfectly placed pocket-holes in a wide variety of material widths and thicknesses, without ever having to release the clamp and reposition the workpiece. Whether you're using one of Kreg's multi-purpose Face Clamps (sold separately) or any common bar clamp or c-clamp, the Kreg Jig's large clamping recess makes it easy to secure your jig to your workbench during use.
For the hard-to-reach repair applications, or when you just want to take your work on the road, the jig's removable Drill Guide guarantees that you'll always have the right tool for the job.
In addition to the Kreg Jig (model K4), Kreg offers serious wood workers the Kreg Jig Master System (model K3MS), the ultimate kit for Kreg Joinery. For basic woodworking or home improvement projects, the Kreg Jig Jr. (model R3) has what you need to get started.
The Kreg Difference
While each Kreg Jig has its own features designed to meet the particular needs of its users, all Kreg Jigs share a design and high-quality construction which add up to the "Kreg Difference."
 Kit includes everything you need to get started. |
To create a cleaner pocket-hole and a more finished appearance, all Kreg Jigs shroud the bit and support the workpiece through 100-percent of the drill-stroke. The end result is minimal bit deflection, reduced tear-out, and a clean, pluggable Pocket-Hole fit for finished work.
Every Kreg Jig also features an optimized 15 degree drilling angle designed to increase driving efficiency and minimize the overall size of the Pocket-Hole. This same Pocket-Hole can be created by the Kreg Jig in materials from 1/2- to 1-1/2 inches thick.
The Kreg Jig includes a 30 Day Customer Satisfaction Guarantee and Lifetime Warranty on its Hardened Steel Drill Guide.
What's in the Box
Kreg Jig K4, stepped drill bit, 6-inch square driver, starter screw set, starter plug set, SkillBuilder DVD, Quick-Start Guide, and durable carrying case.
Kreg Tools
Kreg PRS3020 True-FLEX Featherboard - Twin PackKreg; Tools
Best price: $24.91
Price in other shops:
Kreg KHC-PREMIUM Face ClampKreg; Tools
Best price: $15.99
Price in other shops:
Kreg KHC-90DCC 90-degree Corner ClampKreg; Tools
Best price: $29.99
Price in other shops:
Kreg Jig K4 Pocket Hole SystemKreg; Tools
Best price: $98.99
Kreg SML-C125 1-1/ 4-Inch No. 2 Coarse Screw (1000-Pack)Kreg; Tools
Best price: $19.50
Price in other shops:
Kreg KHC-RAC Right Angle ClampKreg; Tools
Best price: $23.49
Price in other shops:
Kreg R3 Jr. Pocket Hole Jig SystemKreg; Tools
Best price: $38.49
Price in other shops:
Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole SystemsKreg; Tools
Best price: $3.88
Price in other shops:
Kreg SK03 Pocket-Hole Screw Kit in 5-SizesKreg; Tools
Best price: $23.81
Price in other shops:
Kreg K3MS K3 Master Pocket Hole Jig SystemKreg; Tools
Best price: $139.00
Price in other shops:
Kreg V05-DVD Pocket Hole Joinery DVD, Building TablesKreg; Tools
Best price: $5.99
Price in other shops:
Kreg KHC-90DCC 90-degree Corner ClampKreg; Tools
Best price: $29.99
Price in other shops:
Kreg SML-F125-1000 1 1/ 4-Inch No. 7 Fine Pocket Hole Screws with Pan-Head, 1000-PackKreg; Tools
Best price: $20.00
Price in other shops:
Kreg P-OAK Oak Plugs for Pockets, 50-PackKreg; Tools
Best price: $3.99
Price in other shops:
The Pocket Hole Drilling Jig Project Book (Popular Woodworking)by Danny Proulx
Popular Woodworking Books; Published: 2004-04-03; Paperback; Book
Best price: $16.18
Price in other shops:
Kreg SML-C125 1-1/ 4-Inch No. 2 Coarse Screw (1000-Pack)Kreg; Tools
Best price: $19.50
Price in other shops:
Kreg KHC-RAC Right Angle ClampKreg; Tools
Best price: $23.49
Price in other shops:
Kreg KHC-PREMIUM Face ClampKreg; Tools
Best price: $15.99
Price in other shops:
Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole SystemsKreg; Tools
Best price: $3.88
Price in other shops:
Kreg SK03 Pocket-Hole Screw Kit in 5-SizesKreg; Tools
Best price: $23.81
Price in other shops: